XADO Gel for Gasoline Engines protects engine parts against wear and actually replaces worn metal surfaces without overhaul. The XADO Gel forms a new cermet coating on friction surfaces resulting in revitalized engine exceeding the performance level of a new gas engine and will save you money before engine rebuild or major overhaul.

One treatment lasts 65,000 miles.

Advantages of XADO

• restores and protects against ring wear, cylinder wear and bearing wear
• reduces fuel consumption
• increases low oil pressure
• reduces oil use
• increases low compression
• increases engine power, improves acceleration
• decreases noise, pinging, rod knock and vibration
• extends engine life before need for engine rebuild or overhaul 
• improves engine operation in as little as 100 miles
• reduces blow by
• cleans engine deposits
• elimonates stuck rings 
• helps pass emissions certification

Technical characteristics
General characteristics of the cermet layer:

• Microhardness – 750 kg/mm2
• Highly corrosion resistant
• Roughness Ra up to 0,06 mkm

Application:
Treatment of an engine with 3 to 10 quart oil capacity:

Step 1
Squeeze the contents of one XADO tube into the oil of a warmed up engine.  Be careful not to drop the XADO tube into the crankcase)
Start the engine and let it idle for 5-10 minutes.

Step 2
Repeat with a second tube of XADO after about 100 miles of normal operation.

Step 3
Repeat with a third tube of XADO after about 100 miles of normal operation. After 800 more miles perform auto service and oil change as normal.

Dosage:
3 - 10 quarts oil capacity:
3 tubes of XADO for total treatment: 1+1+1
New engines: 2 tubes XADO

11-20 quarts oil capacity:
6 tubes of XADO for total treatment: 2+2+2
New engines: 4 XADO tubes