XADO Moto is designed to restore, repair and protect engines of less than 1000 cc. XADO MOTO works in 2 stroke and 4 stroke systems. Speicifically motorcycles, jet skis, lawn mowers, ATVs, chain saws, punches, drills etc. Ensures triple effect – repair, protection and savings.
Advantages
- restores cylinder wear, eliminates scratches and microcracks
- increases low compression in cylinders
- protects friction parts from wear
- reduces fuel consumption
- increases engine power
- extends engine life
- reduces harmful emissions
- decreases noise and vibration
Technical characteristics
General characteristics of the cermet layer:
- Microhardness – 750 kg/mm2
- High corrosion resistance
- Roughness Ra up to 0,06 mkm
Treatment procedure for small engines:
Combined fuel and oil system
Step 1. Add the content of one sachet to a few ounces of fuel and add to the full fuel tank.
- Start the engine and let it idle for at least 2 minutes
- Run as normal
Step 2. When refilling the fuel tank repeat Step 1 with a second sachet.
Step 3. When refilling the fuel tank repeat Step 1 with a third sachet.
Separate fuel and oil system
Step 1. Warm up the engine to operating temperature
- Squeeze out the content of one sachet into the oil reservoir.
- Start the engine and let it idle for at least 2 minutes
- Run as normal
Step 2. After 4 hours of normal operation, repeat Step 1 with a second sachet.
Step 3. After 4 hours of normal operation, repeat Step 1 with a third sachet.
XADO Moto is equally effective in all types of two and four-cycle engines.
The treatment is complete after 20 hours of engine operation. It is not necessary to change oil in four-cycle engines before the treatment.
Double the dose if the volume of the engine is more than 1000 cc.
XADO revitalizant is compatible with all additives, metal conditioners.
The protective cermet coating forms on the surface all alloys.